Home > Product Groups > Temperature Controllers > DIN Rail Mounted > 

Temperature Controller - DRR245

Temperature Controller - DRR245

Price: £125.00

The advanced DRR245 process controller is specifically designed for industrial control panels where the controller/indicator has to be mounted on a DIN rail.

Introduction

The Pixsys DRR245 process controller features universal input configurable for up to 18 different sensor options and is suitable both for stand-alone installation and for remote control via RS485 communications. These features make the Pixsys DRR245 process controller ideal for a whole range of industrial applications. A main feature of the Pixsys DRR245 process controller is the many types of sensor input for which the unit is configurable.

The Pixsys DRR245 process controller accepts input from a full range of thermocouples, RTDs, current transformers, and potentiometers. Output options available to the Pixsys DRR245 process controller include relays (including Open/Close logic for valves), SSR, 4-20mA and 0-10 Volt (both for control and/or rescalable retransmission of setpoint/process value). The Pixsys DRR245 process controller has an extended power supply range of 24 to 265Vac/dc.

The Pixsys DRR245 process controller also has a retransmission function to convert signal or thermocouple input to output (either 4-20mA or 0-10V). Serial communication via RS485/ModbusRTU protocol and load monitoring via current transformer are both standard functions of the Pixsys DRR245 process controller. A Latch-on function for sensor calibration (including load cells) is also included.

A Windows®-based software package is available to set all parameters on PC and save the programs to/from controllers, for archive purposes, and to reduce the time required for start-up. A memory card with internal battery is provided with the Pixsys DRR245 process controller which allows the parameters and settings to be duplicated within seconds without connecting the controller to a power supply. An additional Memory Card also allows upgrade of firmware.

The Pixsys DRR245 process controller is approved by CE, CSA and UL.


Overview

  • BOX: standard DIN 43880
  • DIN rail EN 50022
  • SUPPLY: 24-230 Vac/dc +/-15%, 50/60Hz
  • POWER CONSUMPTION: 3W
  • DISPLAY: dual 4 digits, 8 red LEDs, decimal point
  • OPERATING CONDITIONS: 0-45°C, 35..95rH%
  • INPUTS: 1 configurable for TC K, J, S, R, PT100 (2 ranges), NI100, PT1000, PT500, PTC1K, NTC10K, 0-10V, 0/4-20mA, 0-40mV, Potentiometers <=6KΩ, <=150KΩ, TA 50mA
  • OUTPUTS: 2 relays 5A resistive + 1 logic SSR 12V-30mA / 4-20mA / 0-10Volt for control or retransmission (4000 points accuracy)
  • RS485 Modbus RTU (57600baud max)
  • Input Transformer 50mA for Loop Break Alarm
  • DIGITAL INPUT: Tuning Start, Setpoint change, selection Man/Auto, Hold function, Start/Stop pre-programmed cycle
  • CONTROL MODES: ON/OFF, P, PI, PID Autotuning
  • ACCURACY: 0.5%±1digit for TC/RTD; 0.2%±1digit for V/mA
  • SAMPLING TIME: selectable (min 15ms)
  • SEALING: IP20 Terminal blocks
  • CONFIGURATION: Parameters protected by password, Memory card with battery for serial productions, software LabSoftView
  • CERTIFICATIONS: CE, CSA UL*


       

      Full product information can be found by downloading the Operating Manual & Data sheets below. Alternatively you can request hard copies, mailed direct to you, by simply completing the request form. Please ensure you add the product type in the box provided. 

       

      More information/downloads:
            Operating Manual


       
       
      More product options are available, please contact the Sales Office for details.