24V to 600VAC Supply, DC Logic input, 4-20mA or 0-10V DC linear inputs, Zero Cross or Burst Firing.

Introduction

Compact & low cost, the New REVO-S is designed to replace contactors and is suitable for all resistive switching applications. REVO-S is a self-contained unit mounted on CD Automation designed heat-sinks. Can be supplied with or without integral quick-blow fuse & holder. Heater break alarm available as an option. 

Overview

• Suitable for resistive and infrared loads
• Current range from 30 to 40A (for larger sizes see 60A to 210A or 300A to 700A)
• Supply voltage up to 480V or 600V AC as option
  
• Fully isolated from the power
  
• Zero crossing firing mode (ZC) or Burst Firing (4, 8 or 16 cycles selectable)
• Logic input signal 4 to 30V DC typical (SSR) plus 4-20mA or 0-10V DC Linear input as an option
  
• Constant current drain, independent of supply voltage with SSR input
• Heater Break (HB) alarm to diagnose partial or total load failure with automatic setting, relay alarm output and front LED indication. Available as an option
• Side by side mounting
• Special design Heatsink with high dissipation value
• IP20 protection
• Complies with CE and cUL specification
   

Engineers  'Quick-Look'  Guide:
Wiring	Dimensions	Technical Data	Ordering Code

 

Full product information can be found by downloading the Operating Manual & Data sheets below. Alternatively you can request hard copies, mailed direct to you, by simply completing the request form.

 

More information/downloads:

Operating & Installation Manual (for SSR input with No Fuse Option)    Operating & Installation Manual (for DC Linear Input & Fuse Option)    Technical Data Sheet

 

View the New Online REVO Product Catalogue, simply click the Catalogue cover

  

                SSR Input only
 

Top

 

 

Top