24V to 600VAC Supply, DC Logic, 4-20mA, 0-10V DC Linear inputs or 10K potentiometer input.

Introduction

A fully digital and universal Thyristor, configurable via RS485 serial communication port or dedicated configuration port for all inputs, firing & performance parameters.

Configuration software available as a download at no cost.

Overview

• Single phase Thyristor unit up to 700A
• Suitable to drive resistive loads with zero cross firing (ZC) modes and inductive loads with phase angle (PA) mode
  
• Universal input signal (SSR, 0-10V, 4-20mA, 10K Pot)
  
• Universal firing, customer configurable via serial port for zero crossing (ZC), single cycle (SC), burst firing (BF), delayed triggering (DT) and phase angle (PA)
  
• Soft Start can be used with single cycle, burst firing and phase angle
• RS485 comms, MODBUS protocol included as standard
  
• Heater Break circuit microprocessor based to diagnose load failure and short circuit on Thyristors as option
  
• IP20 Protection

Full product information can be found by downloading the Operating Manual & Data sheets below. Alternatively you can request hard copies, mailed direct to you, by simply completing the request form. Please ensure you add the product type in the box provided. 

More information/downloads:

Technical Data Sheet (All sizes)       Operating Manual (10A to 110A)       Operating Manual (125A to 700A)