Solid State Relay REVO-S 2PH (RS2) 30A to 700A

Ideal for: Normal Resistance, Medium and Long Wave IR load types
3 wire / 24Vac to 600Vac Supply / DC Logic input, 4-20mA or 0-10V DC linear inputs / Zero Cross or Burst Firing (4, 8 or 16 cycles @50% power demand).

Compact & low cost, the New REVO-S is designed to replace contactors and is suitable for all resistive switching applications. REVO-S is a self-contained unit mounted on CD Automation designed heat-sinks. Integral quick-blow fuse & holder can be supplied on unit sizes 30A to 40A units as an option, with Internal fixed fuses on 60A upwards as standard. Heater break alarm available as an option.

Overview
Technical Information
Installation
Downloads

Suitable for resistive and medium or long wave infrared loads
Current range - 30A, 35A, 40A, 60A, 90A, 120A, 150A, 180A, 210A, 280A, 400A, 450A, 500A, 600A, 700A
Supply voltage up to 480V or 600V AC as option
Fully isolated from the power
Zero crossing firing mode (ZC) or Burst Firing (4, 8 or 16 cycles selectable)
Logic input signal 4 to 30V DC typical (SSR) plus 4-20mA or 0-10V DC Linear input as an option
Constant current drain, independent of supply voltage with SSR input
Heater Break (HB) alarm to diagnose partial or total load failure with automatic setting, relay alarm output and front LED indication. Available as an option
Side by side mounting
Special design Heatsink with high dissipation value
IP20 protection
Complies with CE and cUL specification

Voltage Power Supply

24V minimum to 480V, 600V On request

Voltage Frequency

50 or 60 Hz no setting needed from 47 to 70 Hz

SSR	4:30Vdc	5mA Max (On ≥ 4Vdc Off ≤ 1Vdc);
Voltage input	0:10Vdc	impedance 15 K ohm;
Current input	0:20/4:20mA	impedance 100 Ohm;

Firing Mode

Zero Crossing, Burst Firing with analog input signal only

Auxiliary Voltage Supply

12:24Vac/dc (30A to 210A only with DC Linear input or HBA)otherwise available as follows 90:130Vac 8VA Max 170:265Vac 8VA Max (Standard) 230:345Vac 8VA Max 300:530Vac 8VA Max (Standard) 510:690Vac 8VA Max

Heater Break Alarm

Microprocessor based with automatic setting Digital Input, Relay Output 0,5A at 110V

Mounting

Panel Mounting

Storage Temperature

-25 °C to 70 °C Max

Altitude

Over 1000m of altitude reduce the nominal current of 2% for each 100m

Humidity

From 5 to 95% without condense and ice

Technical Data Sheet

Click here to register and download the Technical Data Sheet

Technical Data Sheet

Click here to register and download the Technical Data Sheet

Technical Data Sheet

Click here to register and download the Technical Data Sheet

Operating & Installation Manual

Click here to register and download the Operating & Installation Manual

Operating & Installation Manual

Click here to register and download the Operating & Installation Manual

Operating & Installation Manual

Click here to register and download the Operating & Installation Manual

Operating & Installation Manual

Click here to register and download the Operating & Installation Manual

Name:
Surname:
Email:
Company:

Name:
Surname:
Email:
Company:

Name:
Surname:
Email:
Company:

Name:
Surname:
Email:
Company:

Name:
Surname:
Email:
Company:

Solid State Relay REVO-S 2PH (RS2) 30A to 700A

Ideal for: Normal Resistance, Medium and Long Wave IR load types3 wire / 24Vac to 600Vac Supply / DC Logic input, 4-20mA or 0-10V DC linear inputs / Zero Cross or Burst Firing (4, 8 or 16 cycles @50% power demand).

Please register to access our files.

Please register to access our files.

Please register to access our files.

Please register to access our files.

Please register to access our files.

Ideal for: Normal Resistance, Medium and Long Wave IR load types
3 wire / 24Vac to 600Vac Supply / DC Logic input, 4-20mA or 0-10V DC linear inputs / Zero Cross or Burst Firing (4, 8 or 16 cycles @50% power demand).